Our 14 channel circuit has 2 main functional settings. The circuit can be set as either a 14
channel data acquisition or servo controller board. Data Acquisition When the circuit has been set to Data Acquisition mode up to 14 sensors can be plugged
into the circuit providing 10 bit resolution data from each of the channels at 100 hertz
(100 scans per second).
Servo Controller With the circuit set to Servo Controller mode up to 14 Radio Control servos can be
positioned to an accuracy of 10 bits and new positions sent at a rate of 50 hertz. Data Transfer Options Users can send their data to or from the circuit either using a serial cable. Connect the
serial cable between the Personal Computer (PC) and 14 channel circuit then load
HyperTerminal. Set the circuit to acquire data and power up the device. A continuous
stream of data can now be seen in the HyperTerminal Window.
The user may optionally receive or transmit data by upgrading to a radio communications
link, please see the RF productssection for purchasing options.
Kit Parts List
- 1 x 14 channel logger/controller circuit
- 1 x null modem serial cable
- 1 x power supply
- PC application on CD
|
